In case of an incoming signal, SMS, voice call and Contact ID are forwarded to the user (max. 8 phone numbers to be notified) and/or remote monitoring. Notification event can be: F2 alarm on input, tamper, power monitor, and vital signal transmission. An individual SMS message can be set about the alarm event. The ringing time, the number of call repeats and the ring call function can be parameterized separately.

The output can be controlled from a voice menu and with a free voice call: from an unlimited number without phone number identification or from 1000 phone numbers with phone number identification. The output can be single-state timed, i.e. monostable (up to 65000 sec) or two-state, bistable.

In the alarm center function, the input can be used as a zone, the output can be used to control the siren, which can be armed/disarmed with a free voice call.

The tamper input on the module can be used to connect a tamper indicator with setting options similar to the inputs. Short-circuited before powering on, then interrupted after 3 seconds after powering on, it functions as a "reset", which can be used to restore the module to its factory default state if necessary. The proprietary battery allows you to signal a complete power failure or continue to operate the device for 24 hours.

Programming can be done via SMS, voice menu, Android (Bluetooth) or computer (USB or Bluetooth) with the ProRead software. The device measures and logs the GSM signal strength values every hour, which can be displayed on a graph with the help of the software. The device is capable of storing 16,000 events (input, output, GSM signal strength, power failure, output control based on call number).

SIM functions: forwarding incoming SMS messages to a pre-programmed phone number, a message warning about the expiry of the SIM card.

Voice menu: call center, human voice menu system, with security number readback for error-free programming.

Expansion option: relay output with panel or alarm control panel panel, etc.

Areas of application:

GSM/GPRS transmission with alarm system
Can also be used as a stand-alone alarm system
Control: gate, barrier and garage opening
Home automation (air conditioning, heating, sauna, lighting)
Monitor mains power supply (230V) and send notification
Reboot and monitor server machines
Industrial solutions thanks to the 8IO extender
Access management, access control