Securecom SC-GPRS - Remote Monitoring Communicator (GPRS)

SC-GPRS
IP-based remote monitoring communicator for TIP/RING line Contact-ID communication with GPRS connection

It translates and sends the TIP/RING telephone line communication of the alarm control panels to the configured remote monitoring as prescribed by the SIA DC-09 standard. Data is transmitted in the GPRS system of the mobile network in the form of TCP/IP or UDP packets.
The device can only interpret the report code set to the CONTACT ID format and send it to the monitoring.

Operation:
The communicator (simulating a wired line to the alarm control panel) receives the Contact ID event code from the control panel, translates it into an IP packet, and then forwards it to the remote monitoring station via the GPRS network.
The surveillance receiver sends a confirmation signal to the communicator for the received event, which forwards the receipt (Kissoff) to the alarm control panel in translation.
At the same time, it is also able to transmit contact signals to the monitoring station on its own input.

Main features
- IP-based transmission of Contact ID codes to remote monitoring
- 2 IP receiver addresses can be set
- Receipt of notification logic from the alarm
- Incoming Contact ID customer code can be sent to the IP receiver modified
- SIM PIN code and device password protection
- Setup and diagnostics via USB

Application
- Transmission of contact events
448"> More